diff --git a/docs/building/android.md b/docs/building/android.md index 93b8b77e..3e9ab089 100644 --- a/docs/building/android.md +++ b/docs/building/android.md @@ -8,50 +8,58 @@ Pre-requesties You need to install Android SDK, NDK and QT with android support. -- [SDK](https://developer.android.com/studio/index.html) (choose command line tools only) -- [NDK](https://developer.android.com/ndk/downloads/index.html) -- [QT](https://www.qt.io/download-open-source/)(for QT only). Choose one for your platform for android. For example QT 5.6 under Linux would be [this file](http://download.qt.io/official_releases/qt/5.6/5.6.1-1/qt-opensource-linux-x64-android-5.6.1-1.run ) +- [SDK](https://developer.android.com/studio/index.html) (choose command line tools only) +- [NDK](https://developer.android.com/ndk/downloads/index.html) +- [QT](https://www.qt.io/download-open-source/)(for QT only). + Choose one for your platform for android. For example QT 5.6 under Linux would be [this file](http://download.qt.io/official_releases/qt/5.6/5.6.1-1/qt-opensource-linux-x64-android-5.6.1-1.run) You also need Java JDK and Ant. QT-Creator (for QT only) ------------------------ -Open QT-creator that should be installed with QT. + +Open QT-creator that should be installed with QT. Go to Settings/Anndroid and specify correct paths to SDK and NDK. -If everything is correct you will see two set avaiable: +If everything is correct you will see two set avaiable: Android for armeabi-v7a (gcc, qt) and Android for x86 (gcc, qt). Dependencies -------------- -Take following pre-compiled binaries from PurpleI2P's repositories. -```bash -git clone https://github.com/PurpleI2P/Boost-for-Android-Prebuilt.git -git clone https://github.com/PurpleI2P/OpenSSL-for-Android-Prebuilt.git -git clone https://github.com/PurpleI2P/MiniUPnP-for-Android-Prebuilt.git -git clone https://github.com/PurpleI2P/android-ifaddrs.git -``` +Take following pre-compiled binaries from PurpleI2P's repositories. + + git clone https://github.com/PurpleI2P/Boost-for-Android-Prebuilt.git + git clone https://github.com/PurpleI2P/OpenSSL-for-Android-Prebuilt.git + git clone https://github.com/PurpleI2P/MiniUPnP-for-Android-Prebuilt.git + git clone https://github.com/PurpleI2P/android-ifaddrs.git Building the app with QT ------------------------ -- Open qt/i2pd_qt/i2pd_qt.pro in the QT-creator -- Change line MAIN_PATH = /path/to/libraries to an actual path where you put the dependancies to -- Select appropriate project (usually armeabi-v7a) and build -- You will find an .apk file in android-build/bin folder + +- Open `qt/i2pd_qt/i2pd_qt.pro` in the QT-creator +- Change line `MAIN_PATH = /path/to/libraries` to an actual path where you put the dependancies to +- Select appropriate project (usually armeabi-v7a) and build +- You will find an .apk file in `android-build/bin` folder Building the app without QT --------------------------- -- Change line I2PD_LIBS_PATH in android/jni/Application.mk to an actual path where you put the dependancies to -- Run 'ndk-build -j4' from andorid folder -- Create or edit file 'local.properties'. Place 'sdk.dir=' and 'ndk.dir=' -- Run 'ant clean debug' + +- Change line `I2PD_LIBS_PATH` in `android/jni/Application.mk` to an actual path where you put the dependancies to +- Run `ndk-build -j4` from andorid folder +- Create or edit file 'local.properties'. Place 'sdk.dir=' and 'ndk.dir=' +- Run `ant clean debug` Creating release .apk ---------------------- -In order to create release .apk you must obtain a Java keystore file(.jks). Either you have in already, or you can generate it yourself using keytool, or from one of you existing well-know ceritificates. For example, i2pd release are signed with this [certificate](https://github.com/PurpleI2P/i2pd/blob/openssl/contrib/certificates/router/orignal_at_mail.i2p.crt). -Create file 'ant.propeties' -key.store='path to keystore file' -key.alias='alias name' -key.store.password='keystore password' -key.alias.password='alias password' -Run 'ant clean release' + +In order to create release .apk you must obtain a Java keystore file(.jks). Either you have in already, or you can generate it yourself using keytool, or from one of you existing well-know ceritificates. +For example, i2pd release are signed with this [certificate](https://github.com/PurpleI2P/i2pd/blob/openssl/contrib/certificates/router/orignal_at_mail.i2p.crt). + +Create file 'ant.propeties': + + key.store='path to keystore file' + key.alias='alias name' + key.store.password='keystore password' + key.alias.password='alias password' + +Run `ant clean release` diff --git a/docs/building/cross.md b/docs/building/cross.md index 78d60e6a..fc884cad 100644 --- a/docs/building/cross.md +++ b/docs/building/cross.md @@ -2,74 +2,73 @@ Cross compilation notes ======================= Static 64 bit windows binary on Ubuntu 15.10 (Wily Werewolf) ---------------------------------------------------------------------- +------------------------------------------------------------ Install cross compiler and friends -```sh -sudo apt-get install g++-mingw-w64-x86-64 -``` + + sudo apt-get install g++-mingw-w64-x86-64 + Default is to use Win32 threading model which lacks std::mutex and such. So we change defaults -```sh -sudo update-alternatives --set x86_64-w64-mingw32-g++ /usr/bin/x86_64-w64-mingw32-g++-posix -``` -From now on we assume we have everything in `~/dev/`. Get Boost sources unpacked into `~/dev/boost_1_60_0/` -and change directory to it. + + sudo update-alternatives --set x86_64-w64-mingw32-g++ /usr/bin/x86_64-w64-mingw32-g++-posix + +From now on we assume we have everything in `~/dev/`. Get Boost sources unpacked into `~/dev/boost_1_60_0/` and change directory to it. Now add out cross compiler configuration. Warning: the following will wipe out whatever you had in there. -```sh -echo "using gcc : mingw : x86_64-w64-mingw32-g++ ;" > ~/user-config.jam -``` + + echo "using gcc : mingw : x86_64-w64-mingw32-g++ ;" > ~/user-config.jam + Proceed with building Boost normal way, but let's define dedicated staging directory -```sh -./bootstrap.sh -./b2 toolset=gcc-mingw target-os=windows variant=release link=static runtime-link=static address-model=64 \ - --build-type=minimal --with-filesystem --with-program_options --with-date_time \ - --stagedir=stage-mingw-64 -cd .. -``` + + ./bootstrap.sh + ./b2 toolset=gcc-mingw target-os=windows variant=release link=static runtime-link=static address-model=64 \ + --build-type=minimal --with-filesystem --with-program_options --with-date_time \ + --stagedir=stage-mingw-64 + cd .. + Now we get & build OpenSSL -```sh -git clone https://github.com/openssl/openssl -cd openssl -git checkout OpenSSL_1_0_2g -./Configure mingw64 no-rc2 no-rc4 no-rc5 no-idea no-bf no-cast no-whirlpool no-md2 no-md4 no-ripemd no-mdc2 \ - no-camellia no-seed no-comp no-krb5 no-gmp no-rfc3779 no-ec2m no-ssl2 no-jpake no-srp no-sctp no-srtp \ - --prefix=~/dev/stage --cross-compile-prefix=x86_64-w64-mingw32- -make depend -make -make install -cd .. -``` -and Zlib -```sh -git clone https://github.com/madler/zlib -cd zlib -git checkout v1.2.8 -CC=x86_64-w64-mingw32-gcc CFLAGS=-O3 ./configure --static --64 --prefix=~/dev/stage -make -make install -cd .. -``` + + git clone https://github.com/openssl/openssl + cd openssl + git checkout OpenSSL_1_0_2g + ./Configure mingw64 no-rc2 no-rc4 no-rc5 no-idea no-bf no-cast no-whirlpool no-md2 no-md4 no-ripemd no-mdc2 \ + no-camellia no-seed no-comp no-krb5 no-gmp no-rfc3779 no-ec2m no-ssl2 no-jpake no-srp no-sctp no-srtp \ + --prefix=~/dev/stage --cross-compile-prefix=x86_64-w64-mingw32- + make depend + make + make install + cd .. + +...and zlib + + git clone https://github.com/madler/zlib + cd zlib + git checkout v1.2.8 + CC=x86_64-w64-mingw32-gcc CFLAGS=-O3 ./configure --static --64 --prefix=~/dev/stage + make + make install + cd .. + Now we prepare cross toolchain hint file for CMake, let's name it `~/dev/toolchain-mingw.cmake` -```cmake -SET(CMAKE_SYSTEM_NAME Windows) -SET(CMAKE_C_COMPILER x86_64-w64-mingw32-gcc) -SET(CMAKE_CXX_COMPILER x86_64-w64-mingw32-g++) -SET(CMAKE_RC_COMPILER x86_64-w64-mingw32-windres) -SET(CMAKE_FIND_ROOT_PATH /usr/x86_64-w64-mingw32) -set(CMAKE_FIND_ROOT_PATH_MODE_PROGRAM NEVER) -``` -Download miniupnpc, unpack, and symlink it into `~/dev/miniupnpc/`. + + set(CMAKE_SYSTEM_NAME Windows) + set(CMAKE_C_COMPILER x86_64-w64-mingw32-gcc) + set(CMAKE_CXX_COMPILER x86_64-w64-mingw32-g++) + set(CMAKE_RC_COMPILER x86_64-w64-mingw32-windres) + set(CMAKE_FIND_ROOT_PATH /usr/x86_64-w64-mingw32) + set(CMAKE_FIND_ROOT_PATH_MODE_PROGRAM NEVER) + +Download miniupnpc, unpack and symlink it into `~/dev/miniupnpc/`. Finally, we can build i2pd with all that goodness -```sh -git clone https://github.com/PurpleI2P/i2pd -mkdir i2pd-mingw-64-build -cd i2pd-mingw-64-build -BOOST_ROOT=~/dev/boost_1_60_0 cmake -G 'Unix Makefiles' ~/dev/i2pd/build -DBUILD_TYPE=Release \ - -DCMAKE_TOOLCHAIN_FILE=~/dev/toolchain-mingw.cmake -DWITH_AESNI=ON -DWITH_UPNP=ON -DWITH_STATIC=ON \ - -DWITH_HARDENING=ON -DCMAKE_INSTALL_PREFIX:PATH=~/dev/i2pd-mingw-64-static \ - -DZLIB_ROOT=~/dev/stage -DBOOST_LIBRARYDIR:PATH=~/dev/boost_1_60_0/stage-mingw-64/lib \ - -DOPENSSL_ROOT_DIR:PATH=~/dev/stage -make -x86_64-w64-mingw32-strip i2pd.exe -``` + + git clone https://github.com/PurpleI2P/i2pd + mkdir i2pd-mingw-64-build + cd i2pd-mingw-64-build + BOOST_ROOT=~/dev/boost_1_60_0 cmake -G 'Unix Makefiles' ~/dev/i2pd/build -DBUILD_TYPE=Release \ + -DCMAKE_TOOLCHAIN_FILE=~/dev/toolchain-mingw.cmake -DWITH_AESNI=ON -DWITH_UPNP=ON -DWITH_STATIC=ON \ + -DWITH_HARDENING=ON -DCMAKE_INSTALL_PREFIX:PATH=~/dev/i2pd-mingw-64-static \ + -DZLIB_ROOT=~/dev/stage -DBOOST_LIBRARYDIR:PATH=~/dev/boost_1_60_0/stage-mingw-64/lib \ + -DOPENSSL_ROOT_DIR:PATH=~/dev/stage + make + x86_64-w64-mingw32-strip i2pd.exe + By now, you should have a release build with stripped symbols. diff --git a/docs/building/ios.md b/docs/building/ios.md index 26688d21..c1753569 100644 --- a/docs/building/ios.md +++ b/docs/building/ios.md @@ -9,31 +9,30 @@ Prerequisites XCode7+, cmake 3.2+ Dependencies --------------- +------------ + - precompiled openssl - precompiled boost with modules `filesystem`, `program_options`, `date_time` and `system` -- ios-cmake toolchain from https://github.com/vovasty/ios-cmake.git +- ios-cmake toolchain from `https://github.com/vovasty/ios-cmake.git` Building ------------------------- +-------- + Assume you have folder structure -``` -lib - libboost_date_time.a - libboost_filesystem.a - libboost_program_options.a - libboost_system.a - libboost.a - libcrypto.a - libssl.a -include - boost - openssl -ios-cmake -i2pd -``` - + lib/ + libboost_date_time.a + libboost_filesystem.a + libboost_program_options.a + libboost_system.a + libboost.a + libcrypto.a + libssl.a + include/ + boost/ + openssl/ + ios-cmake/ + i2pd/ ```bash mkdir -p build/simulator/lib build/ios/lib include/i2pd @@ -77,9 +76,10 @@ cp i2pd/*.h include/i2pd ``` Include into project ---------------------------- -1. add all libraries in `lib` folder to `Project linked frameworks`. -2. add `libc++` and `libz` libraries from system libraries to `Project linked frameworks`. -3. add path to i2p headers to your `Headers search paths` +-------------------- -Alternatively you may use swift wrapper https://github.com/vovasty/SwiftyI2P.git \ No newline at end of file +- add all libraries in `lib` folder to `Project linked frameworks`. +- add `libc++` and `libz` libraries from system libraries to `Project linked frameworks`. +- add path to i2p headers to your `Headers search paths` + +Alternatively you may use swift wrapper `https://github.com/vovasty/SwiftyI2P.git` diff --git a/docs/building/unix.md b/docs/building/unix.md index b1cc4148..b7a638f5 100644 --- a/docs/building/unix.md +++ b/docs/building/unix.md @@ -4,129 +4,34 @@ Building on Unix systems First of all we need to make sure that all dependencies are satisfied. This doc is trying to cover: + * [Debian/Ubuntu](#debian-ubuntu) (contains packaging instructions) * [Fedora/Centos](#fedora-centos) * [Fedora/Centos](#mac-os-x) * [FreeBSD](#freebsd) Make sure you have all required dependencies for your system successfully installed. +See [this](requirements.md) page for common requirements. If so then we are ready to go! Let's clone the repository and start building the i2pd: -```bash -git clone https://github.com/PurpleI2P/i2pd.git -cd i2pd/build -cmake -DCMAKE_BUILD_TYPE=Release # more options could be passed, see "CMake Options" -make # you may add VERBOSE=1 to cmdline for debugging -``` + + git clone https://github.com/PurpleI2P/i2pd.git + +Generic build process looks like this (with cmake): + + cd i2pd/build + cmake . # see "CMake Options" section below + make # you may add VERBOSE=1 to cmdline for debugging + +..or with quick-and-dirty way with just make: + + cd i2pd/ + make After successfull build i2pd could be installed with: -```bash -make install -``` -or you can just use 'make' once you have all dependencies (boost and openssl) installed -```bash -git clone https://github.com/PurpleI2P/i2pd.git -cd i2pd -make -``` - -Debian/Ubuntu -------------- - -You will need a compiler and other tools that could be installed with `build-essential` package: -```bash -sudo apt-get install build-essential -``` - -Also you will need a bunch of development libraries: -```bash -sudo apt-get install \ - libboost-chrono-dev \ - libboost-date-time-dev \ - libboost-filesystem-dev \ - libboost-program-options-dev \ - libboost-system-dev \ - libboost-thread-dev \ - libssl-dev -``` - -If you need UPnP support (don't forget to run CMake with `WITH_UPNP=ON`) miniupnpc development library should be installed: -```bash -sudo apt-get install libminiupnpc-dev -``` - -You may also build deb-package with the following: -```bash -sudo apt-get install fakeroot devscripts -cd i2pd -debuild --no-tgz-check -``` - -Fedora/Centos -------------- - -You will need a compiler and other tools to perform a build: -```bash -sudo yum install make cmake gcc gcc-c++ -``` - -*Latest Fedora system using [DNF](https://en.wikipedia.org/wiki/DNF_(software)) instead of YUM by default, you may prefer to use DNF, but YUM should be ok* - -Also you will need a bunch of development libraries -```bash -sudo yum install boost-devel openssl-devel -``` - -If you need UPnP support (don't forget to run CMake with `WITH_UPNP=ON`) miniupnpc development library should be installed: -```bash -miniupnpc-devel -``` -> *Centos 7 has CMake 2.8.11 in the official repositories that too old to build i2pd, CMake >=2.8.12 is required.* -> -> But you can use cmake3 from the epel repository: -> ```bash -> yum install epel-release -y -> yum install make cmake3 gcc gcc-c++ miniupnpc-devel boost-devel openssl-devel -y -> cmake3 -DWITH_LIBRARY=OFF -DWITH_UPNP=ON -DWITH_HARDENING=ON -DBUILD_SHARED_LIBS:BOOL=OFF -> make -> ``` - -MAC OS X --------- - -Requires [homebrew](http://brew.sh/) - -```bash -brew install libressl boost -``` - -Then build: -```bash -make HOMEBREW=1 -``` - - -FreeBSD -------- - -For 10.X use clang. You would also need boost and openssl ports. -Type gmake, it invokes Makefile.bsd, make necessary changes there is required. - -Branch 9.X has gcc v4.2, that knows nothing about required c++11 standart. - -Required ports: - -* `devel/cmake` -* `devel/boost-libs` -* `lang/gcc47`(or later version) - -To use newer compiler you should set these variables(replace "47" with your actual gcc version): -```bash -export CC=/usr/local/bin/gcc47 -export CXX=/usr/local/bin/g++47 -``` + make install CMake Options ------------- @@ -137,12 +42,94 @@ Available CMake options(each option has a form of `=`, for more info * `WITH_BINARY` build i2pd itself * `WITH_LIBRARY` build libi2pd * `WITH_STATIC` build static versions of library and i2pd binary -* `WITH_UPNP` build with UPnP support (requires libupnp) -* `WITH_AESNI` build with AES-NI support (ON/OFF) +* `WITH_UPNP` build with UPnP support (requires libminiupnp) +* `WITH_AESNI` build with AES-NI support (ON/OFF) * `WITH_HARDENING` enable hardening features (ON/OFF) (gcc only) * `WITH_PCH` use pre-compiled header (experimental, speeds up build) Also there is `-L` flag for CMake that could be used to list current cached options: -```bash -cmake -L -``` + + cmake -L + +Debian/Ubuntu +------------- + +You will need a compiler and other tools that could be installed with `build-essential` package: + + sudo apt-get install build-essential + +Also you will need a bunch of development libraries: + + sudo apt-get install \ + libboost-chrono-dev \ + libboost-date-time-dev \ + libboost-filesystem-dev \ + libboost-program-options-dev \ + libboost-system-dev \ + libboost-thread-dev \ + libssl-dev + +If you need UPnP support miniupnpc development library should be installed (don't forget to rerun CMake with needed option): + + sudo apt-get install libminiupnpc-dev + +You may also build deb-package with the following: + + sudo apt-get install fakeroot devscripts + cd i2pd + debuild --no-tgz-check + +Fedora/Centos +------------- + +You will need a compiler and other tools to perform a build: + + sudo yum install make cmake gcc gcc-c++ + +Also you will need a bunch of development libraries + + sudo yum install boost-devel openssl-devel + +If you need UPnP support miniupnpc development library should be installed (don't forget to rerun CMake with needed option): + + sudo yum install miniupnpc-devel + +Latest Fedora systems using [DNF](https://en.wikipedia.org/wiki/DNF_(software)) instead of YUM by default, you may prefer to use DNF, but YUM should be ok + +Centos 7 has CMake 2.8.11 in the official repositories that too old to build i2pd, CMake >=2.8.12 is required. +But you can use cmake3 from the epel repository: + + yum install epel-release -y + yum install make cmake3 gcc gcc-c++ miniupnpc-devel boost-devel openssl-devel -y + +...and then use 'cmake3' instead 'cmake'. + +MAC OS X +-------- + +Requires [homebrew](http://brew.sh) + + brew install boost libressl + +Then build: + + make HOMEBREW=1 + +FreeBSD +------- + +For 10.X use clang. You would also need devel/boost-libs, security/openssl and devel/gmake ports. +Type gmake, it invokes Makefile.bsd, make necessary changes there is required. + +Branch 9.X has gcc v4.2, that is too old (not supports -std=c++11) + +Required ports: + +* `devel/cmake` +* `devel/boost-libs` +* `lang/gcc47`(or later version) + +To use newer compiler you should set these variables(replace "47" with your actual gcc version): + + export CC=/usr/local/bin/gcc47 + export CXX=/usr/local/bin/g++47 diff --git a/docs/building/windows.md b/docs/building/windows.md index 5c9fda5a..0aa76877 100644 --- a/docs/building/windows.md +++ b/docs/building/windows.md @@ -23,81 +23,55 @@ paths like /c/dev/ for C:\dev\. msys2 ----- -### x86 (32-bit architecture) +Get install file `msys2-$ARCH-*.exe` from `https://msys2.github.io` -Get install file msys2-i686-*.exe from https://msys2.github.io. -open MSYS2 Shell (from Start menu). -Install all prerequisites and download i2pd source: +Where $ARCH is `i686` or `x86_64` (matching your system). -```bash -pacman -S mingw-w64-i686-boost mingw-w64-i686-openssl mingw-w64-i686-gcc git make -mkdir -p /c/dev/i2pd -cd /c/dev/i2pd -git clone https://github.com/PurpleI2P/i2pd.git -cd i2pd -export PATH=/mingw32/bin:/usr/bin # we need compiler on PATH which is usually heavily cluttered on Windows -make -``` - - -### x64 (64-bit architecture) - -Get install file msys2-x86_64-*.exe from https://msys2.github.io. -open MSYS2 Shell (from Start menu). -Install all prerequisites and download i2pd source: - -```bash -pacman -S mingw-w64-x86_64-boost mingw-w64-x86_64-openssl mingw-w64-x86_64-gcc git make -mkdir -p /c/dev/i2pd -cd /c/dev/i2pd -git clone https://github.com/PurpleI2P/i2pd.git -cd i2pd -export PATH=/mingw64/bin:/usr/bin # we need compiler on PATH which is usually heavily cluttered on Windows -make -``` +- Open MSYS2 Shell (from Start menu). +- Install all prerequisites and download i2pd source: + export ARCH='i686' # or 'x86_64' + export MINGW='mingw32' # or 'mingw64' + pacman -S mingw-w64-$ARCH-boost mingw-w64-$ARCH-openssl mingw-w64-$ARCH-gcc git make + mkdir -p /c/dev/i2pd + cd /c/dev/i2pd + git clone https://github.com/PurpleI2P/i2pd.git + cd i2pd + # we need compiler on PATH which is usually heavily cluttered on Windows + export PATH=/$MINGW/bin:/usr/bin + make ### Caveats -It is important to restrict PATH as described above. If you have -Strawberry Perl and/or Mercurial installed, it will pick up gcc & -openssl from the wrong places. +It is important to restrict PATH as described above. +If you have Strawberry Perl and/or Mercurial installed, +it will pick up gcc & openssl from the wrong places. -If you do use precompiled headers to speed up compilation -(recommended), things can go wrong if compiler options have changed -for whatever reason. Just delete `stdafx.h.gch` found in your build -folder, note the file extension. - -If you are an Arch Linux user, refrain from updating system with -`pacman -Syu`. Always update runtime separately as described on the -home page, otherwise you might end up with DLLs incompatibility -problems. +If you do use precompiled headers to speed up compilation (recommended), +things can go wrong if compiler options have changed for whatever reason. +Just delete `stdafx.h.gch` found in your build folder, note the file extension. +If you are an Arch Linux user, refrain from updating system with `pacman -Syu`. +Always update runtime separately as described on the home page, +otherwise you might end up with DLLs incompatibility problems. ### AES-NI -If your processor has -[AES instruction set](https://en.wikipedia.org/wiki/AES_instruction_set), -you use `make USE_AESNI=1`. No check is done however, it -will compile, but it might crash with `Illegal instruction` if not supported. +If your processor has [AES instruction set](https://en.wikipedia.org/wiki/AES_instruction_set), +use `make USE_AESNI=1` instead just `make`. No check is done however, it will compile, +but it might crash with `Illegal instruction` if this feature is not supported by your processor. -You should be able to run ./i2pd . If you need to start from the new -shell, consider starting *MinGW-w64 Win32 Shell* instead of *MSYS2 Shell* as -it adds`/minw32/bin` to the PATH. +You should be able to run ./i2pd . If you need to start from the new shell, +consider starting *MinGW-w64 Win32 Shell* instead of *MSYS2 Shell* +as it adds `/minw32/bin` to the PATH. ### UPnP -You can install it through the MSYS2 -and build with USE_UPNP key. -```bash -pacman -S mingw-w64-i686-miniupnpc -make USE_UPNP=yes -``` -or -```bash -pacman -S mingw-w64-x86_64-miniupnpc -make USE_UPNP=yes -``` +You can install it through the MSYS2 and build with `USE_UPNP` key. + + export ARCH='i686' # or 'x86_64' + pacman -S mingw-w64-$ARCH-miniupnpc + make USE_UPNP=yes Using Visual Studio ------------------- @@ -112,7 +86,6 @@ Requirements for building: * [Netwide assembler](http://www.nasm.us/) * Strawberry Perl or ActiveState Perl, do NOT try msys2 perl, it won't work - ### Building Boost Open a Command Prompt (there is no need to start Visual Studio command @@ -129,11 +102,9 @@ If you are on 64-bit Windows and you want to build 64-bit version as well After Boost is compiled, set the environment variable `BOOST_ROOT` to the directory Boost was unpacked to, e.g., C:\dev\boost. -If you are planning on building only particular variant, e.g. Debug -only and static linking, and/or you are out of space/time, you might -consider `--build-type=minimal`. Take a look at -[appveyor.yml](../appveyor.yml) for details on how test builds are done. - +If you are planning on building only particular variant, e.g. Debug only and static linking, +and/or you are out of space/time, you might consider `--build-type=minimal`. +Take a look at [appveyor.yml](../appveyor.yml) for details on how test builds are done. ### Building OpenSSL @@ -153,23 +124,19 @@ Now open Visual Studio command prompt and change directory to that with OpenSSL You should have it installed into C:\OpenSSL-Win32 by now. -Note that you might consider providing `-DOPENSSL_ROOT_DIR` to CMake -and/or create a symlink (with mklink /J) to C:\OpenSSL if you plan on -maintaining multiple versions, e.g. 64 bit and/or -static/shared. Consult `C:\Program Files -(x86)\CMake\share\cmake-3.3\Modules\FindOpenSSL.cmake` for details. - +Note that you might consider providing `-DOPENSSL_ROOT_DIR` to CMake and/or +create a symlink (with mklink /J) to C:\OpenSSL if you plan on maintain +multiple versions, e.g. 64 bit and/or static/shared. +See `C:\Program Files (x86)\CMake\share\cmake-3.3\Modules\FindOpenSSL.cmake` for details. ### Get miniupnpc -If you are behind a UPnP enabled router and don't feel like manually -configuring port forwarding, you should consider using -[MiniUPnP](http://miniupnp.free.fr) client. I2pd can be built capable -of using miniupnpc shared library (DLL) to open up necessary -port. You'd want to have include headers around to build i2pd with -support for this. Unpack client source code in a sibling folder, -e.g. C:\dev\miniupnpc . You may want to remove version number from -folder name included in downloaded archive. +If you are behind a UPnP enabled router and don't feel like manually configuring port forwarding, +you should consider using [MiniUPnP](http://miniupnp.free.fr) client. +I2pd can be built capable of using miniupnpc shared library (DLL) to open up necessary port. +You'd want to have include headers around to build i2pd with support for this. +Unpack client source code to subdir, e.g. `C:\dev\miniupnpc`. +You may want to remove version number from folder name included in downloaded archive. ### Creating Visual Studio project @@ -177,19 +144,16 @@ Start CMake GUI, navigate to i2pd directory, choose building directory, e.g. ./ Alternatively, if you feel adventurous, try that from the command line -``` -cd -mkdir out -cd out -cmake ..\build -G "Visual Studio 12 2013" -DWITH_UPNP=ON -DWITH_PCH=ON -DCMAKE_INSTALL_PREFIX:PATH=C:\dev\Debug_Win32_stage -``` - -WITH_UPNP will stay off, if necessary files are not found. + mkdir i2pd\out + cd i2pd\out + cmake ..\build -G "Visual Studio 12 2013" -DWITH_UPNP=ON -DWITH_PCH=ON -DCMAKE_INSTALL_PREFIX:PATH=C:\dev\Debug_Win32_stage +If necessary files are not found `WITH_UPNP` will stay off. ### Building i2pd -You can open generated solution/project with Visual Studio and build -from there, alternatively you can use `cmake --build . --config Release --target install` or +You can open generated solution/project with Visual Studio and build from there, +alternatively you can use `cmake --build . --config Release --target install` or [MSBuild tool](https://msdn.microsoft.com/en-us/library/dd293626.aspx) -`msbuild i2pd.sln /p:Configuration=Release`. + + msbuild i2pd.sln /p:Configuration=Release