i2pd

I2P router written in C++ Contains all ongoing changes from https://bitbucket.org/orignal/i2pd/src

License

This project is licensed under the BSD 3-clause license, which can be found in the file LICENSE in the root of the project source code.

Donations

BTC: 1K7Ds6KUeR8ya287UC4rYTjvC96vXyZbDY
LTC: LKQirrYrDeTuAPnpYq5y7LVKtywfkkHi59
ANC: AQJYweYYUqM1nVfLqfoSMpUMfzxvS4Xd7z

Downloads

Official binary releases could be found at: http://i2pd.website/releases/
older releases http://download.i2p.io/purplei2p/i2pd/releases/

Build Statuses

• Linux x64 -
• Linux ARM - To be added
• Mac OS X - Got it working, but not well tested. (Only works with clang, not GCC.)
• Microsoft VC13 - To be added

Testing

First, build it.

On Ubuntu/Debian based

• sudo apt-get install libboost-dev libboost-filesystem-dev libboost-program-options-dev libboost-regex-dev libboost-date-time-dev libssl-dev zlib1g-dev
• $ cd i2pd
• $ make

Then, run it:

$ ./i2p

The client should now reseed by itself. To visit an eepsite use HTTP proxy port 4446. For tunnels follow instructions

Cmdline options

• --host= - The external IP (deprecated).
• --port= - The port to listen on
• --httpaddress= - The address to listen on (HTTP server)
• --httpport= - The port to listen on (HTTP server)
• --log= - Enable or disable logging to file. 1 for yes, 0 for no.
• --daemon= - Enable or disable daemon mode. 1 for yes, 0 for no.
• --service= - 1 if uses system folders (/var/run/i2pd.pid, /var/log/i2pd.log, /var/lib/i2pd).
• --v6= - 1 if supports communication through ipv6, off by default
• --floodfill= - 1 if router is floodfill, off by default
• --bandwidth= - L if bandwidth is limited to 32Kbs/sec, O if not. Always O if floodfill, otherwise L by default.
• --httpproxyaddress= - The address to listen on (HTTP Proxy)
• --httpproxyport= - The port to listen on (HTTP Proxy) 4446 by default
• --socksproxyaddress= - The address to listen on (SOCKS Proxy)
• --socksproxyport= - The port to listen on (SOCKS Proxy). 4447 by default
• --proxykeys= - optional keys file for proxy's local destination
• --ircaddress= - The address to listen on (IRC tunnel)
• --ircport= - The port listen on (IRC tunnel). 6668 by default
• --ircdest= - I2P destination address of IRC server. For example irc.postman.i2p
• --irckeys= - optional keys file for tunnel's local destination
• --eepkeys= - File name containing destination keys, for example privKeys.dat. The file will be created if it does not already exist (issue #110).
• --eephost= - Address incoming trafic forward to. 127.0.0.1 by default
• --eepport= - Port incoming trafic forward to. 80 by default
• --samaddress= - The address to listen on (SAM bridge)
• --samport= - Port of SAM bridge. Usually 7656. SAM is off if not specified
• --bobaddress= - The address to listen on (BOB command channel)
• --bobport= - Port of BOB command channel. Usually 2827. BOB is off if not specified
• --i2pcontroladdress= - The address to listen on (I2P control service)
• --i2pcontrolport= - Port of I2P control service. Usually 7650. I2PControl is off if not specified
• --tunnelscfg= - Tunnels Config file (default: ~/.i2pd/tunnels.cfg or /var/lib/i2pd/tunnels.cfg)
• --conf= - Config file (default: ~/.i2pd/i2p.conf or /var/lib/i2pd/i2p.conf) This parameter will be silently ignored if the specified config file does not exist. Options specified on the command line take precedence over those in the config file.

Config files

INI-like, syntax is the following : = . All command-line parameters are allowed as keys, for example:

i2p.conf:

log = 1
v6 = 0
ircdest = irc.postman.i2p

tunnels.cfg (filename of this config is subject of change):

; outgoing tunnel sample, to remote service
; mandatory parameters:
; * type -- always "client"
; * port -- local port to listen to
; * destination -- i2p hostname
; optional parameters (may be omitted)
; * keys -- our identity, if unset, will be generated on every startup,
; if set and file missing, keys will be generated and placed to this file
[IRC]
type = client
port = 6668
destination = irc.echelon.i2p
keys = irc-keys.dat

; incoming tunnel sample, for local service
; mandatory parameters:
; * type -- always "server"
; * host -- ip address of our service
; * port -- port of our service
; * keys -- file with LeaseSet of address in i2p
; optional parameters (may be omitted)
; * inport -- optional, i2p service port, if unset - the same as 'port'
; * accesslist -- comma-separated list of i2p addresses, allowed to connect
; every address is b32 without '.b32.i2p' part
[LOCALSITE]
type = server
host = 127.0.0.1
port = 80
keys = site-keys.dat
inport = 81
accesslist = [,]