yggdrasil-go/src/tuntap/ckr.go

463 lines
12 KiB
Go

package tuntap
import (
"bytes"
"encoding/hex"
"errors"
"fmt"
"net"
"sort"
"sync"
"sync/atomic"
"github.com/yggdrasil-network/yggdrasil-go/src/address"
"github.com/yggdrasil-network/yggdrasil-go/src/crypto"
)
// This module implements crypto-key routing, similar to Wireguard, where we
// allow traffic for non-Yggdrasil ranges to be routed over Yggdrasil.
type cryptokey struct {
tun *TunAdapter
enabled atomic.Value // bool
reconfigure chan chan error
ipv4routes []cryptokey_route
ipv6routes []cryptokey_route
ipv4cache map[address.Address]cryptokey_route
ipv6cache map[address.Address]cryptokey_route
ipv4sources []net.IPNet
ipv6sources []net.IPNet
mutexroutes sync.RWMutex
mutexcaches sync.RWMutex
mutexsources sync.RWMutex
}
type cryptokey_route struct {
subnet net.IPNet
destination crypto.BoxPubKey
}
// Initialise crypto-key routing. This must be done before any other CKR calls.
func (c *cryptokey) init(tun *TunAdapter) {
c.tun = tun
c.reconfigure = make(chan chan error, 1)
go func() {
for {
e := <-c.reconfigure
e <- nil
}
}()
c.tun.log.Debugln("Configuring CKR...")
if err := c.configure(); err != nil {
c.tun.log.Errorln("CKR configuration failed:", err)
} else {
c.tun.log.Debugln("CKR configured")
}
}
// Configure the CKR routes - this must only ever be called from the router
// goroutine, e.g. through router.doAdmin
func (c *cryptokey) configure() error {
current, _ := c.tun.config.Get()
// Set enabled/disabled state
c.setEnabled(current.TunnelRouting.Enable)
// Clear out existing routes
c.mutexroutes.Lock()
c.ipv6routes = make([]cryptokey_route, 0)
c.ipv4routes = make([]cryptokey_route, 0)
c.mutexroutes.Unlock()
// Add IPv6 routes
for ipv6, pubkey := range current.TunnelRouting.IPv6Destinations {
if err := c.addRoute(ipv6, pubkey); err != nil {
return err
}
}
// Add IPv4 routes
for ipv4, pubkey := range current.TunnelRouting.IPv4Destinations {
if err := c.addRoute(ipv4, pubkey); err != nil {
return err
}
}
// Clear out existing sources
c.mutexsources.Lock()
c.ipv6sources = make([]net.IPNet, 0)
c.ipv4sources = make([]net.IPNet, 0)
c.mutexsources.Unlock()
// Add IPv6 sources
c.ipv6sources = make([]net.IPNet, 0)
for _, source := range current.TunnelRouting.IPv6Sources {
if err := c.addSourceSubnet(source); err != nil {
return err
}
}
// Add IPv4 sources
c.ipv4sources = make([]net.IPNet, 0)
for _, source := range current.TunnelRouting.IPv4Sources {
if err := c.addSourceSubnet(source); err != nil {
return err
}
}
// Wipe the caches
c.mutexcaches.Lock()
c.ipv4cache = make(map[address.Address]cryptokey_route, 0)
c.ipv6cache = make(map[address.Address]cryptokey_route, 0)
c.mutexcaches.Unlock()
return nil
}
// Enable or disable crypto-key routing.
func (c *cryptokey) setEnabled(enabled bool) {
c.enabled.Store(enabled)
}
// Check if crypto-key routing is enabled.
func (c *cryptokey) isEnabled() bool {
enabled, ok := c.enabled.Load().(bool)
return ok && enabled
}
// Check whether the given address (with the address length specified in bytes)
// matches either the current node's address, the node's routed subnet or the
// list of subnets specified in IPv4Sources/IPv6Sources.
func (c *cryptokey) isValidSource(addr address.Address, addrlen int) bool {
c.mutexsources.RLock()
defer c.mutexsources.RUnlock()
ip := net.IP(addr[:addrlen])
if addrlen == net.IPv6len {
// Does this match our node's address?
if bytes.Equal(addr[:16], c.tun.addr[:16]) {
return true
}
// Does this match our node's subnet?
if bytes.Equal(addr[:8], c.tun.subnet[:8]) {
return true
}
}
// Does it match a configured CKR source?
if c.isEnabled() {
// Build our references to the routing sources
var routingsources *[]net.IPNet
// Check if the prefix is IPv4 or IPv6
if addrlen == net.IPv6len {
routingsources = &c.ipv6sources
} else if addrlen == net.IPv4len {
routingsources = &c.ipv4sources
} else {
return false
}
for _, subnet := range *routingsources {
if subnet.Contains(ip) {
return true
}
}
}
// Doesn't match any of the above
return false
}
// Adds a source subnet, which allows traffic with these source addresses to
// be tunnelled using crypto-key routing.
func (c *cryptokey) addSourceSubnet(cidr string) error {
c.mutexsources.Lock()
defer c.mutexsources.Unlock()
// Is the CIDR we've been given valid?
_, ipnet, err := net.ParseCIDR(cidr)
if err != nil {
return err
}
// Get the prefix length and size
_, prefixsize := ipnet.Mask.Size()
// Build our references to the routing sources
var routingsources *[]net.IPNet
// Check if the prefix is IPv4 or IPv6
if prefixsize == net.IPv6len*8 {
routingsources = &c.ipv6sources
} else if prefixsize == net.IPv4len*8 {
routingsources = &c.ipv4sources
} else {
return errors.New("Unexpected prefix size")
}
// Check if we already have this CIDR
for _, subnet := range *routingsources {
if subnet.String() == ipnet.String() {
return errors.New("Source subnet already configured")
}
}
// Add the source subnet
*routingsources = append(*routingsources, *ipnet)
c.tun.log.Infoln("Added CKR source subnet", cidr)
return nil
}
// Adds a destination route for the given CIDR to be tunnelled to the node
// with the given BoxPubKey.
func (c *cryptokey) addRoute(cidr string, dest string) error {
c.mutexroutes.Lock()
c.mutexcaches.Lock()
defer c.mutexroutes.Unlock()
defer c.mutexcaches.Unlock()
// Is the CIDR we've been given valid?
ipaddr, ipnet, err := net.ParseCIDR(cidr)
if err != nil {
return err
}
// Get the prefix length and size
_, prefixsize := ipnet.Mask.Size()
// Build our references to the routing table and cache
var routingtable *[]cryptokey_route
var routingcache *map[address.Address]cryptokey_route
// Check if the prefix is IPv4 or IPv6
if prefixsize == net.IPv6len*8 {
routingtable = &c.ipv6routes
routingcache = &c.ipv6cache
} else if prefixsize == net.IPv4len*8 {
routingtable = &c.ipv4routes
routingcache = &c.ipv4cache
} else {
return errors.New("Unexpected prefix size")
}
// Is the route an Yggdrasil destination?
var addr address.Address
var snet address.Subnet
copy(addr[:], ipaddr)
copy(snet[:], ipnet.IP)
if addr.IsValid() || snet.IsValid() {
return errors.New("Can't specify Yggdrasil destination as crypto-key route")
}
// Do we already have a route for this subnet?
for _, route := range *routingtable {
if route.subnet.String() == ipnet.String() {
return errors.New(fmt.Sprintf("Route already exists for %s", cidr))
}
}
// Decode the public key
if bpk, err := hex.DecodeString(dest); err != nil {
return err
} else if len(bpk) != crypto.BoxPubKeyLen {
return errors.New(fmt.Sprintf("Incorrect key length for %s", dest))
} else {
// Add the new crypto-key route
var key crypto.BoxPubKey
copy(key[:], bpk)
*routingtable = append(*routingtable, cryptokey_route{
subnet: *ipnet,
destination: key,
})
// Sort so most specific routes are first
sort.Slice(*routingtable, func(i, j int) bool {
im, _ := (*routingtable)[i].subnet.Mask.Size()
jm, _ := (*routingtable)[j].subnet.Mask.Size()
return im > jm
})
// Clear the cache as this route might change future routing
// Setting an empty slice keeps the memory whereas nil invokes GC
for k := range *routingcache {
delete(*routingcache, k)
}
c.tun.log.Infoln("Added CKR destination subnet", cidr)
return nil
}
}
// Looks up the most specific route for the given address (with the address
// length specified in bytes) from the crypto-key routing table. An error is
// returned if the address is not suitable or no route was found.
func (c *cryptokey) getPublicKeyForAddress(addr address.Address, addrlen int) (crypto.BoxPubKey, error) {
c.mutexcaches.RLock()
// Check if the address is a valid Yggdrasil address - if so it
// is exempt from all CKR checking
if addr.IsValid() {
return crypto.BoxPubKey{}, errors.New("Cannot look up CKR for Yggdrasil addresses")
}
// Build our references to the routing table and cache
var routingtable *[]cryptokey_route
var routingcache *map[address.Address]cryptokey_route
// Check if the prefix is IPv4 or IPv6
if addrlen == net.IPv6len {
routingcache = &c.ipv6cache
} else if addrlen == net.IPv4len {
routingcache = &c.ipv4cache
} else {
return crypto.BoxPubKey{}, errors.New("Unexpected prefix size")
}
// Check if there's a cache entry for this addr
if route, ok := (*routingcache)[addr]; ok {
c.mutexcaches.RUnlock()
return route.destination, nil
}
c.mutexcaches.RUnlock()
c.mutexroutes.RLock()
defer c.mutexroutes.RUnlock()
// Check if the prefix is IPv4 or IPv6
if addrlen == net.IPv6len {
routingtable = &c.ipv6routes
} else if addrlen == net.IPv4len {
routingtable = &c.ipv4routes
} else {
return crypto.BoxPubKey{}, errors.New("Unexpected prefix size")
}
// No cache was found - start by converting the address into a net.IP
ip := make(net.IP, addrlen)
copy(ip[:addrlen], addr[:])
// Check if we have a route. At this point c.ipv6routes should be
// pre-sorted so that the most specific routes are first
for _, route := range *routingtable {
// Does this subnet match the given IP?
if route.subnet.Contains(ip) {
c.mutexcaches.Lock()
defer c.mutexcaches.Unlock()
// Check if the routing cache is above a certain size, if it is evict
// a random entry so we can make room for this one. We take advantage
// of the fact that the iteration order is random here
for k := range *routingcache {
if len(*routingcache) < 1024 {
break
}
delete(*routingcache, k)
}
// Cache the entry for future packets to get a faster lookup
(*routingcache)[addr] = route
// Return the boxPubKey
return route.destination, nil
}
}
// No route was found if we got to this point
return crypto.BoxPubKey{}, errors.New(fmt.Sprintf("No route to %s", ip.String()))
}
// Removes a source subnet, which allows traffic with these source addresses to
// be tunnelled using crypto-key routing.
func (c *cryptokey) removeSourceSubnet(cidr string) error {
c.mutexsources.Lock()
defer c.mutexsources.Unlock()
// Is the CIDR we've been given valid?
_, ipnet, err := net.ParseCIDR(cidr)
if err != nil {
return err
}
// Get the prefix length and size
_, prefixsize := ipnet.Mask.Size()
// Build our references to the routing sources
var routingsources *[]net.IPNet
// Check if the prefix is IPv4 or IPv6
if prefixsize == net.IPv6len*8 {
routingsources = &c.ipv6sources
} else if prefixsize == net.IPv4len*8 {
routingsources = &c.ipv4sources
} else {
return errors.New("Unexpected prefix size")
}
// Check if we already have this CIDR
for idx, subnet := range *routingsources {
if subnet.String() == ipnet.String() {
*routingsources = append((*routingsources)[:idx], (*routingsources)[idx+1:]...)
c.tun.log.Infoln("Removed CKR source subnet", cidr)
return nil
}
}
return errors.New("Source subnet not found")
}
// Removes a destination route for the given CIDR to be tunnelled to the node
// with the given BoxPubKey.
func (c *cryptokey) removeRoute(cidr string, dest string) error {
c.mutexroutes.Lock()
c.mutexcaches.Lock()
defer c.mutexroutes.Unlock()
defer c.mutexcaches.Unlock()
// Is the CIDR we've been given valid?
_, ipnet, err := net.ParseCIDR(cidr)
if err != nil {
return err
}
// Get the prefix length and size
_, prefixsize := ipnet.Mask.Size()
// Build our references to the routing table and cache
var routingtable *[]cryptokey_route
var routingcache *map[address.Address]cryptokey_route
// Check if the prefix is IPv4 or IPv6
if prefixsize == net.IPv6len*8 {
routingtable = &c.ipv6routes
routingcache = &c.ipv6cache
} else if prefixsize == net.IPv4len*8 {
routingtable = &c.ipv4routes
routingcache = &c.ipv4cache
} else {
return errors.New("Unexpected prefix size")
}
// Decode the public key
bpk, err := hex.DecodeString(dest)
if err != nil {
return err
} else if len(bpk) != crypto.BoxPubKeyLen {
return errors.New(fmt.Sprintf("Incorrect key length for %s", dest))
}
netStr := ipnet.String()
for idx, route := range *routingtable {
if bytes.Equal(route.destination[:], bpk) && route.subnet.String() == netStr {
*routingtable = append((*routingtable)[:idx], (*routingtable)[idx+1:]...)
for k := range *routingcache {
delete(*routingcache, k)
}
c.tun.log.Infof("Removed CKR destination subnet %s via %s\n", cidr, dest)
return nil
}
}
return errors.New(fmt.Sprintf("Route does not exists for %s", cidr))
}